Skip to main content

Power Electronics

NCP167AMX330TBG LDO Regulator
NCP167AMX330TBG LDO Regulator

NCP167AMX330TBG Ultra-Low Noise, High PSRR LDO Regulator

The NCP167AMX330TBG is a linear regulator capable of supplying 700 mA output current. Designed to meet the requirements of RF and analog circuits, the NCP167 AMX330TBG device provides low noise, high PSRR, low quiescent current, and very good load/line transients.
INA226 IC
INA226 IC

INA226 Ultra-Precise I2C Output Current, Voltage and Power Monitor

The INA226 is a current and power monitor chip with high-accuracy ADC and a resolution of 16bit. It features I2C and SMBUS-compatible interfaces for easy integration and monitors both shunt voltage drop and bus voltage drop.
MAX4173FESA Current Sense Amplifier
MAX4173FESA Current Sense Amplifier

MAX4173FESA Low-Cost High-Side Current Sense Amplifier

The MAX4173FESA is a low-cost, precision, high-side current sense amplifier in the SO-8 Package.
MCP73831T IC
MCP73831T IC

MCP73831T Single-Cell Li-Ion, Li-Polymer Charge Management Controllers

The MCP73831 devices are extremely sophisticated linear charge management controllers for use in situations with limited space and a tight budget. The MCP73831 devices are offered in a 5-Lead SOT-23 configuration.
SP3485 Transceiver
SP3485 Transceiver

SP3485 Low Power Half-Duplex RS-485 Transceiver

The SP3485 is a 3.3V powered, half-duplex, low-power RS-485 transceiver that fully meets the requirements of the TIA/EIA-485 standard. The SP3485 includes a driver and a receiver, both of which can be independently enabled and disabled.
IR2104 MOSFET
IR2104 MOSFET

IR2104 Half Bridge MOSFET Driver

The IR2104 is a high-speed Half-Bridge gate driver chip that accepts low-power input to output high-power current drives.
Mini360 DC DC Buck Converter Module
Mini360 Buck Converter Module

Mini360 1.8A DC-DC Adjustable Buck Converter Module

The Mini360 is a small but efficient buck converter module built around the MP2307 from Monolithicpower.
Battery Capacity Tester Module
Battery Capacity Tester

Battery Capacity Tester

A battery capacity tester is used to measure the amount of charge stored in a battery in Ah. It can be used to measure the actual capacity of batteries compared to their rating and to discharge batteries safely.  
TP5000 Battery Charger Module
TP5000 Battery Charger Module

TP5000 Single-Cell LiPo Charger Module

The TMP5000 module is a breakout board that contains the TP5000 single-cell LiPo battery charging IC and the associated peripheral components that set charge parameters.  
TP5100 Module
TP5100 Module

TP5100 Lithium Cell Charging Module

The TP5100 is an integrated Lithium battery charger that has a switch mode buck topology. It has all the integrated functions to charge a single or dual cell Lithium battery, along with a few peripheral components.