Skip to main content

ADXL335 Accelerometer Module

The ADXL335 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.


ADXL335 Pinout Configuration

Pin Name




The Vcc pin powers the module, typically with +5V


Power Supply Ground


X-axis Analog Output Pin


Y-axis Analog Output Pin


Z-axis Analog Output Pin


Self-Test Pin. This pin controls the Self-Test feature.


Accelerometer Module Features & Specifications

  • Operating Voltage: 3V to 6V DC
  • Operating Current: 350μA
  • Sensing Range: ±3g
  • 3-axis sensing
  • High Sensitivity for small movements
  • Needs no external components
  • Easy to use with Microcontrollers or even with normal Digital/Analog IC
  • Small, cheap and easily available


Alternate Sensor Modules: IR Sensor Module, LDR Sensor Module, TP4056ALi-ion Battery Charging/Discharging Module, DS3231 RTC Module, TMC2209 Stepper Motor Driver Module, DRV8825 Stepper Motor Driver Module, A4988 Stepper Motor Driver Module, NEO-6MV2 GPS Module, Joystick Module, EM18 - RFID Reader Module, GLCD 128x64, ADXL335 Accelerometer Module, HMC5883L Magnetometer Module, Soil Moisture Sensor

Related Components: ADXL335, Resistors, Voltage Regulator IC


Brief about Accelerometer Module

This ADXL335 Accelerometer module consists of an ADXL335 Accelerometer IC, Voltage Regulator IC, resistors, and capacitors in an integrated circuit. Different manufacturers use a different voltage regulator IC. Most of the modules use XC6206P332MR (662K) IC.


ADXL335 IC from Analog Devices is the brain of this module. The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g.

Apart from ADXL335 IC this module also consists of a 3.3V voltage regulator IC.  

ADXL335 Accelerometer Module


How to Use the ADXL335 Accelerometer Module

ADXL335 Accelerometer module consists of six pins i.e. VCC, GND, X, Y, Z, and ST. Using the Accelerometer module with a microcontroller is very easy. Connect VCC and GND pins to 5V and GND pins of Microcontroller. Also connect X, Y, and Z pins to the Analog pins of Arduino. The basic structure of the accelerometer consists of fixed plates and moving plates. When the acceleration is applied on an axis capacitance between fixed plates and moving plates is changed. This results in a sensor output voltage amplitude which is proportional to the acceleration.


Applications of ADXL335 Accelerometer

  • Cost-sensitive, low power, motion- and tilt-sensing applications
  • Mobile devices
  • Gaming systems
  • Disk drive protection
  • Image stabilization
  • Sports and health devices
Component Datasheet

Related Post

Join 20K+subscribers

We will never spam you.

* indicates required

Be a part of our ever growing community.